> Bluetooth speaker with built-in Mic
> IPX5 water proof
> Built-in Self-timer
> Voice prompt for easy operation
> 3.5mm Line in and TF card (MP3/WMA/WAV/SBC) input to play external audio sources
> Support A2DP/AVRCP
> Speaker: 3W with power amplifer
> Bluetooth V3.0
> Music playing time: 3 hours
Blue tooth speaker with Ipx5 for India Market (SMB468)
> Key description:
Bluetooth | V3.0 |
Support | A2DP/AVRCP |
water proof | YES |
3.5mm Line in and TF card | YES |
Speaker | 3W with power amplifer |
Music playing time | 3 hours |
Standby time | 16 hours |
Color | Black/Blue/Purple/Orange/Yellow |
Size | 90*90*45mm |
N.W | 135g |
Hot sale blut tooth speaker with IPX5 for India market (SMB468)
Operating Instructions
Charging Your Speaker
Prior to using the speaker for the first time, the battery needs to
be fully charged, Approximately 1.5 hrs are required to fully charge
the speaker.
The indicator light turns red while being charged, and turns off
after being fully charged.
When the headset is running out of battery, the indicator light will
flash red and prompt (the speaker will switch off automatically
when the battery is drained).
Pls charge the speaker as above steps in time to prolong the
battery's useful life.
Turning your Speaker On and Off
Turning on the speaker
Press and hold the On/Off button for 3 seconds.
Turning off the speaker
Press and hold the On/Off button for 3 seconds.
Paring Your Speaker
1.Press and hold the On/Off button for 3 seconds until indicator
light flashes blue.
2.Activate your device's Bluetooth function; please refer to your
device user guide for details.
3.Select speaker "SMB468" from the found devices list.
4.If successfully paired, the speaker will prompt, and indicator
light will circle blue.
5.Ensure the distance between your speaker and device is within
10 meters, and without any obstacles. You can use the speaker
enjoy music wireless now!
6.If the speaker had paired with your device but disconnected,
it will paired automatically again when turns on. If the speaker
doesn' t find the paired device in 10 seconds, it will automatically
entry into pairing mode.
Play / Pause music
When you play the music, press Play/Pause button once to play
music and press it once again to pause music
Forward
Short press Forward button to forward to the next song
Backward
Short press Backward button to return back to the last song
Adjust volume
Long press Forward button to increase volume or Backward
button to decrease.
TF Card Audio in
Insert TF card, the speaker will entry into the card reader mode
automatically. You can listen music playing from the insert TF card.
3.5MM Audio in
Long press the Play/Pause key then switch into Line in mode.
Connect the other music device via 3.5MM audio cable with
speaker, you can listen music from the bluetooth speaker while
playing music from the device.
Remarks:
When the music is transmitted to the bluetooth speaker, you
can't use the speaker to Forward or Backward to choose song
from the music device, only can adjust the volume and Play/Pause
music.
Answering / Rejecting Call / Ending a Call
The speaker with built-in mic supports phone calls when paired
with Bluetooth enable phone.
You can click the Play/Pause button once to answer the incoming
call or hold press it for 2 seconds to reject it.
While speaking, press the Play/Pause button once to end the
call or end the call via your mobile phone in the normal way.
Remote Shutter
*May vary due to device settings & Bluetooth version. Some
devices may not support this function.
When the speaker paired with the Bluetooth-enable phone,
you can use it to remote control the camera in phone and take
photos in distance.
1.Active the camera in your mobile phone.
2.Press button to take photo.
Remarks:
If can't take photo following above steps, pls check:
a.Check the setting of paired Bluetooth device "SMB468", make
sure it supports all the profiles, including Call audio, Media
audio and Input device.
b.Check the setting of the camera and adjust the Volume key
as the camera key.
c.There are total three modes settled inside, make sure the
remote shutter is in the right mode to fit your phone. Long
press button until you hear the prompt to change.
Mode 1: 1 beep
Mode 2: 2 beeps
Mode 3: 3 beeps
Troubleshooting
Troubleshooting
If you are unable to connect your speaker and mobile phone,
please try the following:
.Ensure your speaker is turned off and is properly charged.
.Ensure the speaker is paired with your mobile phone.
.Ensure your mobile phone's Bluetooth feature is activated.
Please refer to your mobile phone used guide for specific instruction.
.Ensure the speaker is within a 10 meter range of your mobile
headset and there are no obstructions, such as walls or other
electronic devices in between.
.Ensure there aren't other active Bluetooth devices nearby.
If the above steps do not solve your problem, please press On/Off
button to rest the speaker.
Care and Maintenance
Do not put bluetooth speaker in liquid moisture or where is moist
for a long time.
Do not use any abrasive solvent to try to clean the bluetooth speaker.
Do not leave the bluetooth speaker in extreme temperatures.
Don not place the bluetooth speaker in fire, which may cause explosion.
Keep the bluetooth speaker from sharp subject, otherwise it will
be scratched or damaged.
Do not insert any subject into the bluetooth speaker, or else its
inner components will be damaged.
Do not try to take apart the bluetooth speaker for no replairable
component is included
Keep the bluetooth speaker in dry non-dusty place where the
temperature fluctuation is moderate.
Do not replace the built-in battery of the bluetooth speaker by
yourself, which is non-repaceable
Blue tooth speaker with Ipx5 for India Market (SMB468)
Ø FAQ
Question | Answer |
1.How many quantity produce per month? | We can produce 50000 pcs per month. |
2. How many year of warranty? | One-year warranty |
3. What kinds of payment can be accepted? | T/T& PayPal& W/U& Money Gram |
4. How would the delivery time be? | 20-25 days |
5. Do you have CQ? | Yes, we have ourselves QC to guarantee product quality. |
6. I would like to print my own LOGO on the headset .Can you accept this? | Yes. We can accept you logo on our headset, but the MOQ should be 1000 pcs/color. |
Blue tooth speaker with Ipx5 for India Market (SMB468)